CVMS Climatic UK

Environmental Testing is carried out in order to ensure and verify the robustness and reliability of manufactured products, materials or devices and and to simulate conditions they will experience during transportation, storage and operation. Industries such as Aerospace, Automotive, Pharmaceuticals, Electronics, Construction and many others have been carrying out environmental test programmes for years and the quality and safety of finished goods has never been as high as it is today.
CVMS °Climatic is at the forefront of the design, build and supply of Environmental Test Equipment from its standard Climatic Test Chambers to large-scale Walk-in or Drive-in Environmental Test Facilities.  As well as controlling temperature and humidity in the test space, we also offer a wide range of products that simulate other environmental effects such as Low Pressure (Altitude), Solar Radiation, Rainfall, Sand, Dust, Pollution and Corrosive atmospheres.

humidity-temperature chamber

Internal volume: 6 chamber sizes from 150  to 1000 litres
Temperature ranges: -20°C, -40°C, -70°C … +180°C
Heating rates: up to 5°C / min
Cooling rates: up to 5°C / min
Temperature fluctuation: ±0.5°C
Temperature uniformity: ±2.0°C
Humidity range: 10%RH … 98%RH
Humidity fluctuation: ±2%RH

salt+fog chamber

CVMS °Climatic produces 6 standard sizes of salt fog test cabinets. They have been designed to accelerate the effects of corrosion on sample materials and devices. 
Internal volume: 6 standard chamber sizes from 100 to 1600 litres
Salt Fog settlement: 1 … 2ml/80 (cm2h)
Temperature range: +35°C … +55°C
Temperature uniformity / Fluctuation rate: ≤2°C / ≤0.5°C

thermal-shock chamber

At the appropriate time the hot (or cold) air is directed into the ambient zone sequentially according to the programme thus providing the thermal shock.
Specifications 2-ZONE
Internal volume: 4 chamber sizes up to 1000 litres
Thermal shock range: -65°C … +150°C
Conversion time: ≤5sec
Recovery time: ≤5min

walk-in chamber

The size of your test item is not a limiting factor with CVMS °Climatic. We can produce test rooms that will fit a whole vehicle, aircraft part, space satellites or huge racks of smaller items that have to be tested or conditioned in bulk.
Internal volume: typically from 8m3 upwards as required
Temperature range: typically from -70°C … +150°C or as required
Humidity range: typically 20%RH … 95%RH or as required
Combined Environments
Solar radiation
Low Pressure
Shopping Cart