sayaka - pciautotronics

sayaka - japan

Sayaka is pioneer manufacturer of PCB Routing Machine ranging from offline to inline to special application routing requirements

Customize unloading process such as P&P conveyer transportation
Automatic select cutting program with JIG BIT system from 31 program(option).
Create and edit cutting data based on DXF data.
Start up the Teaching application PCB-EDIT2 on the PC and then just click somewhere you want to cut on the screen.
Extended router bit’s life by the function of Z axis height changeover.
Adopt safety standard ISO13849-1.
There is little distortion on PCB during cutting because using high-frequency spindle motor. It is 1/10 of pressing, 1/100 of breaking by hand.
Smooth cutting finish only by router cutting.
Able to cut liner and arc with router machine, diminish the restriction on PCB design.
One-touch program changeover.
Powerful Dust Collection minimized dust adhesion on PCB.
Immediate pass/fail information on completion of each test
Step and repeat function for multi-leaded devices
4 Individual globule blocks for wetting balance testing
Testing ability down to 0201 devices
Greater accuracy using a sampling rate measuring to levels better than 0.1mN/BIT
Force Resolution 0.001mN
Immersion depth 0-30mm at a resolution of 0.01mm
Immersion speed 0-30mm/s (resolution 0.05mm/s)

High Speed Cutting is realized by maximizing 3 Axes Control and those moving speed
Image Processing Function is installed. Simple Teaching can be done with PC screen.
Positioning compensation done by Image Processing further increases the cutting accuracy.
Router bit depth changeover function lengthen router bit life-span.
Camera can read QR code(2 dimension code) auto select cutting program.
There is little distortion on PCB during cutting because using high-frequency spindle motor. It is 1/10 of pressing, 1/100 of breaking by hand.
Smooth cutting finish only by router cutting.
Able to cut liner and arc with router machine, diminish the restriction on PCB design.
One-touch program changeover.
Powerful Dust Collection minimized dust adhesion on PCB.

Simple layout keep cost down.
Compact desktop design is perfect for cell production.
Dust Collection from underside of cutting JIG, thus minimized adhesion of dust.
Cutting Jig Can be Compatible with Upward Class NJ Series Machines.
Create and edit cutting data based on DXF data. Start up the Teaching application PCB-EDIT2 on the PC and then just click somewhere you want to cut on the screen.
Automatic select cutting program with JIG BIT system from 31 program.
Extended router bit’s life by the function of Z axis height 3 stages manual changeover. It reduced running cost.
There is little distortion on PCB during cutting because using high-frequency spindle motor. It is 1/10 of pressing, 1/100 of breaking by hand.
Smooth cutting finish only by router cutting.
Able to cut liner and arc with router machine, diminish the restriction on PCB design.
One-touch program changeover.